Can You Put A Tube In A Tubeless Tractor Tire?

Can You Put A Tube In A Tubeless Tractor Tire?

Farming Base ( is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to This site also participates in other affiliate programs and is compensated for referring traffic and business to them.

When owning a tractor, you know how to take good care of it so that it serves you for a long time. As a tractor owner, one of the things you need to know about your machine is how to properly care about its tires. Some tires have tubes, others are tubeless. So the question is can you put a tube in a tubeless tractor tire and how to do it?

The short answer is that you can put a tube in a tubeless tractor tire, but not the other way around. You can put the tube but if you’re outfitting vintage equipment, it’s best to go tubeless 99% of the time. However, there are some advantages to have a tube in the tractor tire.

Most of the time, tractor tires are very expensive, and putting a tube in the tubeless tire can be a great option when there is a minor air leak, as long as the tire casing is still good. Many tires leak sidewalls, but are still usable and safe which is why it is ok to put them in a tube and solve your problems.

Can You Put A Tube In A Tubeless Tractor Tire 

Tractor tires are getting more and more expensive which is why farmers try to find a better solution for their machines than changing and buying brand new tires. You can throw a tube in your tractor tire to help against leaks. In a way, this logic makes sense because the tube is giving you an extra layer of protection.

So the simple answer would be that it is possible to put a tube in a tubeless tractor tire. Unless you’re out lifting vintage equipment, it’s best to go tubeless 99% of the time. It is important to mention that tire manufacturers first developed tubeless tires in the 1970s and today you can find them on nearly all farm machinery.

It is important to identify what kind of tire your tractor uses and that is a very simple task. Tubeless tires on your tractor are easy to identify because they include ”tubeless” on the sidewall somewhere. In case the tire does not say ”tubeless” on its sidewall, you’ll need to use a tube, otherwise, you’re asking for an immediate tire failure.

It is important to mention that there are some advantages of tubes. First, it’s easier to seat the bead on a flat tire with a tube. Also, a tube can be helpful in a case where a tire has a bent bead. Also, there are some farmers that swear by tube tires for working steep hillsides. You may experience fewer issues with tires coming off their beads when you have tubed tires.

There are some retailers that sell used tires at the Tire Supply store. Tire dealers may specify that specific used tubeless tires need tubes. Also, there are tires that may have some service life but have aged casings or a really slow leak.

To conclude, you can also use an inner tube to fix a slow or hard-to-find leak on a tubeless tire.

How To Put A Tube In A Tubeless Tire

As I mentioned earlier, you can put a tube into a tubeless tractor tire when there is a minor leak. This can save you some money because you won’t have to buy a new tire for your machine. There are a few simple steps that you have to follow to put a tube in a tubeless tire on your tractor.

  1. First, you have to do is to cut out the part where you air the tube up, the valve system, to allow the tube part to be inserted there. You should put the part the air goes in and put it at a certain angle.
  2. Lay the tube where it angles up to insert it into the hole.
  3. Then take one side of the tire bead loose and off the rim and then insert the tube.
  4. Remove the valve from the valve system of the tube by using a little tool that you can buy at the bike shop.
  5. Next, put the bead back on carefully with bike tools or large screwdrivers. Do it carefully because you don’t want to catch the tube.
  6. You should inflate the tube and let the air go out mostly and then reinsert the valve into the valve stem. 

This method will help you prevent catching the tube behind the bead and pinching and cutting it as opposed to just blowing it up. One must mention that the tube may not align itself well, and the valve system may not stick out properly. This is not a big problem it just makes checking and inflating a little bit more difficult.

Leave a Comment

Your email address will not be published.